- Employment
- full time
Employer Job Description
From EnerMech's posting. “We” and “our” refer to the employer.
We are EnerMech, a specialist service company that delivers safe, integrated solutions for complex energy projects. For over 50 years, we have supported our clients across the world with unrivalled expertise, equipment, and technology throughout the entire asset lifecycle – both offshore and onshore.
Operating through our global business lines of Energy Solutions, Infrastructure & Industrial Solutions, and Lifting Solutions, we provide a broad range of specialist services including cranes, lifting, fluid power, training, equipment rental, pipeline, process, subsea, and valve services.
At EnerMech, we are driven by operational excellence, innovation, and technical expertise, delivering value through integrated solutions that reduce risk, improve efficiency, and enhance performance for our customers worldwide.
Role Overview
On-site Project Manager is accountable for the safe, compliant and profitable delivery of pre-commissioning, commissioning and turnaround scopes on energy facilities, including power plants, LNG trains, gas processing and petrochemical units. The role owns each project across its full lifecycle, from contract award through planning, execution and monitoring, to handover and close-out, applying PMI/PMBOK knowledge areas to deliver contracted scope, protect margin and build lasting client confidence.
The job holder directs EnerMech IIS specialty services on site, including lube oil and hydraulic flushing, chemical cleaning, nitrogen services, hydro blasting, hydro milling, field machining and bolted joint integrity, and oversees all equipment and personnel mobilisations, resupply and demobilisations.
Responsibilities
- Integration: Own the Project Execution Plan and act as single point of accountability from award to handover and close-out.
- Scope: Define scope by system and subsystem, and control it through formal change and variation management.
- Schedule: Baseline and maintain a resource-loaded schedule aligned to the client's RFSU or turnaround window, and recover slippage.
- Cost: Deliver to budget and margin using EVM and forecast-to-complete, with timely invoicing and variation recovery.
- Quality: Deliver to the EnerMech QMS and client specifications, with complete, traceable test and cleanliness records.
- Resources: Plan mobilisations, equipment and competent crews, making efficient use of internal and rented assets.
- Communications: Run a structured reporting rhythm to client and management, and escalate issues early.
- Risk & HSE: Manage the risk register, JSAs, SIMOPs and permit-to-work, with zero-harm leadership on site.
- Procurement: Manage subcontractors, rental equipment and consumables to contract terms, cost and quality.
- Stakeholders: Act as primary client interface and align EPCs, OEMs and internal teams, including through change.
- Continuous Improvement: Capture lessons learned and champion enterprise procedures, templates and the SharePoint PM knowledge base.
- Lube oil & hydraulic flushing: High-velocity turbulent flushing of turbine, compressor and pump lube/seal oil systems; temporary loops and bypassing; particle counting to ISO 4406 / NAS 1638; API 614 and OEM acceptance criteria.
- Chemical cleaning: Degreasing, acid pickling, passivation and neutralisation; chemical handling, waste management and disposal; cleanliness verification.
- Hydro blasting / hydro jetting: High and ultra-high pressure water jetting of heat exchangers, vessels and pipework; WJTA or equivalent safe practice; exclusion zones and PPE.
- Hydro milling: Rotary water-jet removal of hard deposits and scale from tubes and piping; tooling selection and inspection of results.
- Nitrogen services: N2 purging, inerting, drying, leak testing (N2/He) and dew point verification prior to hydrocarbon introduction.
- Pressure testing: Hydrostatic and pneumatic testing to ASME B31.3 / client spec; test pack preparation, reinstatement and certificates.
- Air / steam blowing & drying: Air blowing, steam blowing of turbine lines with target plate acceptance, vacuum and air drying.
- Field machining: On-site flange facing, milling, cutting and bevelling; tolerance checks.
- Bolting, torquing & tensioning: Bolted joint integrity to ASME PCC-1; flange management, joint tagging and records.
- Completions & handover: System / subsystem breakdown, ITRs (A/B check sheets), punch lists, Mechanical Completion, RFC and RFSU; completions systems such as GoTechnology, ProCoSys or WinPCS
- Typical facility exposure: combined-cycle and simple-cycle power plants, LNG liquefaction and regas terminals, gas processing plants, refineries and petrochemical units.
Requirements
- Degree in Mechanical, Chemical or Process Engineering, or equivalent trade qualification with demonstrable progression into project management.
- 10+ years in mechanical / process services, including 5+ years managing pre-commissioning or commissioning projects on energy facilities.
- Direct delivery experience of at least three of: lube oil flushing, chemical cleaning, hydro blasting / hydro milling, nitrogen services, pressure testing, bolting and field machining.
- Proven management of project P&L, budgets, variations and client invoicing.
- Working knowledge of completions management, system turnover and handover documentation.
- Will require extended periods on site in Mainland USA
- Valid driver's licence; able to travel and work on remote sites for extended periods.
- Desirable
- PMP (PMI), APM / PRINCE2 or suitably experienced.
- OSHA 30, NEBOSH or equivalent HSE qualification; TWIC card for US Gulf Coast sites.
- Experience on LNG or combined-cycle power projects for major EPCs or owner-operators.
- Proficiency with MS Project or Primavera P6 and a completions database.
- Proven experience implementing standardised project processes, governance and controls.
- Financial and accounting knowledge including Earned Value and percentage-of-completion accounting.
- Track record of leading organisational or project change initiatives.
Benefits
- At EnerMech, you'll join a global organisation where innovation, collaboration and technical excellence drive everything we do. You'll have the opportunity to influence business strategy, develop long-term customer partnerships and contribute to some of the world's most challenging energy and industrial projects.
- We offer a collaborative and entrepreneurial environment where commercial leadership is valued, professional development is encouraged and your contribution will directly support the continued growth and success of our business.
- Diversity & Inclusion
- EnerMech is committed to creating a diverse and inclusive workplace where everyone feels valued, respected, and empowered to succeed. We welcome applications from candidates of all backgrounds and experiences.
About This Listing
LAYIQ is an independent job-discovery service. This listing does not imply a partnership with or endorsement by the employer. Review the original posting for current details and availability.
Employer posted:
Listing Check
- Employer Posted
- · today
- Status
- Listed as a current opening
- Apply Goes To
- Workable, the employer's hiring system
How to spot a ghost jobGhost Job Checker: check another job link
The checker shows whether the employer still lists a job.





